Michigan State University Extension
Preserving Food Safely - 01600884
10/13/97

Canning Crean Style Corn



GUIDE 4:11
CORN--CREAM STYLE


QUANTITY: An average of 20 pounds (in husks) of sweet
corn is needed per canner load of 9 pints. A bushel
weighs 35 pounds and yields 12 to 20 pints -- an average
of 2-1/4 pounds per pint.


QUALITY: Select ears containing slightly immature
kernels, or of ideal quality for eating fresh.


PROCEDURE: Husk corn, remove silk, and wash ears.
Blanch ears 4 minutes in boiling water. Cut corn from
cob at about the center of kernel. Scrape remaining corn
from cobs with a table knife.


Hot pack -- To each quart of corn and scrapings, add two
cups of boiling water. Heat to boiling. Add 1/2
teaspoon salt to each jar, if desired. Fill pint jar
with hot corn mixture, leaving 1-inch headspace. Adjust
lids and process.


Recommended process time for CORN-CREAM STYLE
in a dial-gauge pressure canner.


Canner Gauge Pressure (PSI)
at Altitudes of


Style Jar Process 0- 2001- 4,001- 6,001-
of Pack Size Time 2,000ft 4,000ft 6,000ft 8,000ft


Hot Pints 85 min 11 lb 12 lb 13 lb 14 lb


Recommended process time for CORN-CREAM STYLE
in a weighted-gauge pressure canner.


Canner Gauge Pressure (PSI)
at Altitudes of


Style Jar Process 0- Above
of Pack Size Time 1,000 ft 1,000 ft


Hot Pints 85 min 10 lb 15 lb


Go To Top of File &&&&&& MSU Extension Home Page &&&&&& Main Page for this Data Base

This information is for educational purposes only. References to commercial products or trade names does not imply endorsement by MSU Extension or bias against those not mentioned. This information becomes public property upon publication and may be printed verbatim with credit to MSU Extension. Reprinting cannot be used to endorse or advertise a commercial product or company. This file was generated from data base 01 on 03/09/98. Data base 01 was last revised on 10/13/97. For more information about this data base or its contents please contact [email protected] . Please read our disclaimer for important information about using our site.