6.3 Pilot/Handspring Tool

Red Hat Linux includes gnome-pilot, a tool that lets you synchronize your Palm or Handspring PDA (personal digital assistant) with your Linux system using your system's serial port and your PDA's serial hot sync cradle. By default, Red Hat Linux is configured to enable you to back up your PDA to your Linux system or restore a backup from your Linux system to your PDA. You can also synchronize Evolution's calendar, task list, and contact list with your PDA. These functions are broken under Red Hat Linux 7.3 and 8.0; however, it's simple to work around the problem.

To set up your system to communicate with your PDA, choose Accessories Pilot/Handspring Tool from the GNOME or KDE menu. The Welcome panel appears, as shown in Figure 6-9.

Figure 6-9. The gnome-pilot Welcome panel

Plug your PDA into its cradle and plug the cradle into your system's serial port. Click Next to continue. The Cradle Settings panel, shown in Figure 6-10, appears. Specify the serial port to which the cradle is attached. If you've synched your PDA by using a Microsoft Windows host, you can use the information in Table 6-1 to determine the serial port.

Table 6-1. Linux and Windows serial port designations

Windows designation	Linux designation
COM1	/dev/ttyS0
COM2	/dev/ttyS1
COM3	/dev/ttyS2
COM4	/dev/ttyS3

Figure 6-10. The Cradle Settings panel

Click Next to continue. The Pilot Identification panel appears, as shown in Figure 6-11. If you've already stored a username and ID in PDA, enable the No radiobutton and specify them. Otherwise, enable the Yes radiobutton.

Figure 6-11. The Pilot Identification panel

Click Next to continue. The Initial Sync panel appears. As directed, press the PDA's HotSync button. Check the PDA's screen to determine if the hot sync succeeded. If it failed, use the Back button to return to a previous screen and correct the problem. Also, check the cable connecting the HotSync cradle to the PC.

If the hot sync succeeded, the Pilot Attributes panel appears. If you like, you can change the Pilot Name and Local basedir values.

Click Next to continue and a Success panel should appear.

When the GNOME Pilot Settings wizard completes, the Pilot Conduits dialog box remains on the desktop. Its purpose is to show the available conduits, small programs that let you move information between your system and PDA. Although several conduits are installed along with gnome-pilot, a bug prevents them from appearing and therefore prevents you from using them.

To view all the conduits, close the Pilot Conduits dialog box. Then, open a terminal window and issue the following command:

gpilotd-control-applet --cap-id=1

A Pilot Conduits dialog box appears, as shown in Figure 6-12. Note that five conduits now appear. By default, the conduits are disabled. You can enable a conduit by clicking Enable. When enabled, some conduits present a small configuration dialog box, as shown in Figure 6-13. Generally, the dialog box lets you configure the direction of information transfer: either from the PDA to the system or from the system to the PDA. Configure each conduit as you prefer and then click OK to close the Pilot Conduits dialog box.

You can create a launcher that makes it convenient to launch gpilot-control-applet. See Chapter 5 to learn how.

Figure 6-12. The Pilot Conduits dialog box

The conduits have the following functions:

Backup

Backs up your PDA contents to a file on your system or restores the PDA contents from a file on your system.

EAddress

Sends Evolution's contact list to your PDA or your PDA's contact list to Evolution.

ECalendar

Sends Evolution's calendar to your PDA or your PDA's calendar to Evolution.

EToDo

Sends Evolution's task list to your PDA or your PDA's task list to Evolution.

File

Transfers files from your system to your PDA or from your PDA to your system. You shouldn't enable this conduit unless you have a specific purpose in mind, in which case you should be careful to properly configure it.

Be sure to properly configure the direction of transfer�the Action�for each conduit. Otherwise, you may destroy important information by performing a transfer in an inappropriate direction. For instance, you could inadvertently transfer old data from your PC onto your PDA, destroying more recent data in the PDA.

Figure 6-13. A conduit configuration dialog box

To perform a hot sync operation, connect your PDA's cradle to your system's serial port, place the PDA in its cradle, and press the HotSync button on the cradle. The enabled conduits run and transfer information between your PDA and system according to the conduit configurations.